Xproto-N out of stock. Pre-orders will be sent out in Aug.(With preorder gift)
Warning: The PCIe riser cable is Gen3 (PCIe 3.0). If you are using a Navi or Ampere GPU along with a B550/X570/Z490/Z590 motherboard, please set your PCIe slot setting from Gen4 (PCIe 4.0) to Gen3 in the BIOS. If you do not change the setting, there is a high risk that you will have video output issues. There’s no need to be concerned about being limited to Gen3, as testing has shown that even with an RTX 3080, there is less than a 5% performance loss downgrading from a Gen4 to Gen3 connection.
You can ignore the above information if you choose PCIE 4.0 riser cable
Please read ALL the information below before you buy!
AIO mounting: You can add an AIO module (or two) and a custom set of cables (for both versions of the Xproto; you can order a set for your power supply on this website) to cart and checkout the items together. One case can be attached with up to two AIO brackets without paying any extra postage for the brackets. If there are more than 2 AIO brackets in your order, please note that you will have to pay extra shipping costs (~$5USD for each additional AIO bracket).The AIO bracket is compatible with both the Xproto and Xproto-L.
GPU compatibility: Due to the shape of the case, the GPU has special length constraints. There is only 315mm of clearance where the graphics card’s backplate/PCB is located. There is 330mm of GPU clearance at the tip of the third slot (60mm away from the GPU backplate position), but towards the central spine of the case the amount of clearance decreases. The shroud of the graphics card can extend past the 315mm mark. A GPU that is 330mm long will fit as long as the PCB of the card is 315mm or shorter. There are no height or width limitations BUT there are only two PCI slots for GPU mounting.
Warning: 3-slot（mounting） GPUs are not supported. If you would like to use a triple-slot GPU, such as the 3090 FE, consider the Xproto-L instead.
Warning: For many RTX 30XX (Ampere) graphics cards, the shroud ends where the PCB ends. This means the GPU needs to be less than 315mm long. Previous generations of GPUs had heatsink and shroud assemblies which extend past the PCB, meaning longer cards could fit. As a rule of thumb, don’t use a GPU longer than 315mm unless you are absolutely sure it is installable. Attached below is a compatibility chart and a diagram.
Warning: Some purchasers have reported that customs duties were charged. You may have to pay customs duties or a similar import tax depending on your country’s import regulations. If you have special requirements to declare, please let us know in your order.
Note: If you wish to add more products to your order (such as an AIO mount plate), please place a new order and choose the “free shipping” option.
Shipping time: Once the order is confirmed and ready to ship, XTIA will send you a confirmation email. The order will be sent out and we will send you the tracking number through another email within a few days. The whole process normally takes around 3-5 business days.
Shipping region costs: To request a quote of postal costs for countries and regions not listed, please contact us via email at welch52553[at]gmail.com.
Cancelling an order: Please send an email to email@example.com and provide your order number to request a cancellation. Your order can only be cancelled before it is shipped, and we cannot guarantee we can cancel your order successfully. There may be a cancellation fee if your order is unusual or custom.
Unique “open-air” case perfect for displaying your components, functioning as both a showpiece and a sturdy foundation for all your parts.
Innovative “butterfly” spine imposes an awe-inspiring look.
Stylish momentary power switch for powering on your PC in an elegant fashion.
Unlimited CPU cooler clearance; even an NH-D15S is supported!
Back-to-back motherboard and graphics card positioning, connected by a riser cable, allow 360 degree hardware viewability.
If you have any questions or concerns, please contact us through one of the following:
Review by Optimum Tech
XTIA “Butterfly” Structure
The specially designed intermediate mezzanine (Zone C) can be used as a cable management area and also contains a hard drive mount point.
The Butterfly design provides high structural integrity and an aesthetically pleasing modular design.
Three Segment Case Assembly
Zone A: PSU & motherboard
Zone B: GPU & power switch
Zone C: cable caddy, hard drives
Modified Open “Sandwich” Case Layout
The open chassis has much better heat dissipation, leading to improved gaming performance. Because of better thermals for your components, you can dial down your fan curves to keep noise at a minimum. It also negates any noise-creating turbulence caused by side panels.
The open-air layout has no dead corners for dust to accumulate, and any dust can be easily cleaned off.
Display your beautiful hardware, viewable at a glance.
Fully CNC Machined
The case is CNC machined from thick, sturdy 4mm aluminum panels, allowing the case to be both lightweight and steady.
The case is a nearly unibody design, allowing for easy assembly as well as elegant rounded corners.